The terms and definitions, types and parameters, accuracy and inspection methods, technical requirements, test methods, inspection rules, and signs, packaging, transportation and storage of the cold chamber die-casting machine are specified. This standard is applicable to horizontal cold chamber die casting machines and vertical cold chamber die casting machines.
Ang nag-vibrate nga Mamatay Casting Machine nagsulti kanimo bahin sa Cold Chamber Le Casting Machine nga gigamit sa Cold Mace Effice Die Casting Machine, apan sa tinuud adunay pipila nga mga kalainan nga gigamit sa {}}
The℃of automation of the hot chamber die casting machine is relatively high, and the loss of material is relatively small, and the production efficiency of the product will be higher than that of the cold chamber die casting machine, however, this type of equipment still has certain restrictions in terms of heat resistance, and it can only be used for the production of low melting point materials such as magnesium alloys and zinc alloys.
Ang mga aluminum nga alloy nga mga castings kaylap nga gigamit sa kapatagan sa industriya, labi na tungod kay ang mga produkto nga matunaw sa panahon mao ang mga produkto sa Colder nga adunay taas nga pag-undang sa taas nga presyur sa taas nga presyur sa taas nga presyur {{2}
The cold chamber die casting machine fills the cavity at high speed during the processing process, and then forms it under high pressure and solidifies the places where the castings are insufficient, mainly because of its metal industry in the high pressure of high-speed cavity filling process is inevitable in the cavity of the air in the cavity is wrapped in the casting, which will form its subcutaneous pores.
The aluminum alloy die castings processed by the cold chamber die casting machine cannot be heat treated, and the surface of the product is not suitable for surface spraying, but it can be painted or the internal pores of the casting will expand during the heating process, resulting in bubbling and deformation of the casting.
The machining allowance of the mechanical cutting of the cold chamber die casting machine should be taken when selecting a little, in general, about 1054mm, this can well reduce the weight of the casting and the amount of cutting to reduce its cost, which can be a good way to avoid penetrating the surface dense layer, exposing the subcutaneous pores, resulting in scrap of the workpiece.
